H-Type Burnishing Tool (‘H-Type’ SRT)
Single Roller ‘H-Type’- Burnishing tools are used for burnishing external diameters. This tool can be used to burnish varying job diameters within a limited range. The design of the tool makes the setting in the machine very easy. Three individual rollers are positioned in between the outer diameter of the Guide Roller and the cage. Only one roller is used for burnishing operation and the other two rollers remains as spare. After the usage the rollers can be indexed to put into use. This saves the time in changing the spares. Necessary spring arrangements are provided to apply the required load on the job to get satisfactory results.
Processing Sketch
Technical Specification
| Title | Description |
|---|---|
| Burnishing Diameter Range | The minimum recommended outer diameter is 20mm and above. Though there is no limitation on maximum outer diameter we have limited the maximum burnishing diameter of this tool to 75mm. |
| Burnishing Length | There is no limitation on the burnishing length on Outer Diameter. |
| Shank | Square Shanks are provided in the standard tools. Also, different shank options are provided for mounting in CNC Lathes and Conventional lathes. |
| Job Material | Any Ferrous or Non-Ferrous material can be burnished. Normally ferrous materials with a maximum natural hardness of 35HRc are recommended for burnishing operation. Heat Treated jobs are not recommended. |
| Machine Used | Single Roller ‘H-Type’ Burnishing Tools can be used in CNC Turning centers and in Conventional Lathes. |